Information: Publication Correction for T.D.C Mark
Models: 164 All
Date: 10/17/94
The method for locating T.D.C as printed in the current 91,94 & 95 Service Manuals showing a HOLE in the flywheel for T.C.C is incorrect for U.S. Spec engines.
Severe engine damage may occur if the hole in the flywheel is used as a T.D.C reference mark
The correct marking for T.D.C. on the flywheel is a SCRIBED LINE (See Illustration below). Refer to T.S.B. # 00.91.03 for the methods of locating T.D.C.
The following is the list of pages within each manual that need correction.
1991 Service Manual = pages 00-37, 00-45 & 01-91
1994 Service Manual = pages 00-34 & O1-92
1995 Service Manual = pages 00-35 & 01-91
1-Scribed Line
on Bellhousing
2-Scribed Line
on Flywheel
Back to TSB List