Re: 164 24V gas smell

To: alfa@digest.net
Subject: Re: 164 24V gas smell
From: Nicky Avery <nravery@a2industries.com>
Date: Wed, 29 Aug 2001 22:33:58 -0700
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=us-ascii
Organization: A2 Industries/Auto VoiceSystems
References: <E15cHHh-00033Q-00@krusty-motorsports.com>
Reply-to: Nicky Avery <nravery@a2industries.com>
Sender: owner-alfa@digest.net

> Be careful you get the correct diameter hose if you go to the local discount parts shop.

Karl is right: it's metric. Don't even bother with inch-based hose -
close enuff is not good enuff and it will leak.

Nicky

--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@digest.net

Prev by Date: Re:
Next by Date: RE: dead verde
Previous by thread: 164 24V gas smell
Next by thread: Why you should not use solder on O2 sensor wire
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index